Home > Products > Power over Ethernet > PoE Switch > APS08atH
USB Peripheral
Outdoor Wireless

‧5.8GHz (802.11ac)
‧2.4GHz (802.11b/g/n)
‧5.8GHz (802.11an)
‧Dual-Band (802.11a/b/g/n)
‧Outdoor AP Accessory
‧Outdoor USB
‧OEM

Indoor Wireless

‧802.11ac USB
‧802.11ac AP/Router
‧802.11b/g/n AP/Router
‧802.11b/g/n USB
‧802.11a/b/g/n AP/Router
‧802.11a/b/g/n USB
‧Mesh
‧OEM

Embedded Module

‧Mini PCIe
‧PCIe
‧USB module
‧Mini PCI
‧Routerboard
‧Booster Module
‧Development Kits

Accessory & Pigtail

‧DC Converter
‧Lightning Protector
‧Outdoor Enclosure
‧RF Connector
‧RJ45 Waterproof
‧USB Accessory
‧USB Holder
‧Development Kits

Antenna & RF Cable

‧4G LTE Antenna
‧MIMO Outdoor Antenna
‧2.4/5GHz Outdoor Antenna
‧2.4/5GHz Indoor Antenna
‧2.4GHz Indoor Antenna
‧2.4GHz Outdoor Antenna
‧5.8GHz Indoor Antenna
‧5.8GHz Outdoor Antenna
‧4G Indoor Antenna
‧900MHz Outdoor Antenna
‧RF Cable
‧Antenna Mount

4G/3G LTE

‧4G LTE USB Modem
‧3.5G Antenna
‧3.5G Router

PowerLine Ethernet

‧200M

Power over Ethernet

‧PoE Cable
‧DDC section
‧PoE Switch
‧Passive PoE Injector
‧Passive PoE Multi Injector
‧PoE Injector (PSE)
‧PD Adapter
‧PD Module
‧PoE Set
‧Power Adapter

Wireless Booster

‧Pen Booster
‧PoE Booster
‧Indoor Booster
‧Outdoor Booster

IP Surveillance

‧Pan/Tilt IP Camera
‧CCD IP Camera 2.0 Megapixel IP Camera

Voice over IP

‧SIP Phone

Switch

‧Gigabit VLAN Switch
‧Router

Phase Out

‧3.5G USB Modem
‧Outdoor Wireless
‧Indoor Wireless
‧Embedded Module
‧Accessory & Pigtail
‧Antenna & Cable
‧3.5G HSUPA
‧PowerLine Ethernet
‧Power over Ethernet
‧IP Surveillance
‧Voice over IP

 
[Join us]
 
 

 

APS08atH  
802.3at 8 Port PoE Switch
 
 
Overview

APS08atH is an 8 port 10/100 Ethernet switchwith all 8 PoE ports. It will automatically detect
the presence of an IEEE 802.3af/at compliant powered device (PD) that will provide power through the Ethernet port. The switch provides up to 30W per PoE port and is used to power PoE AP/Router, PoE IP phone, PoE IP Camera, or Alfa PD-1000D with an non-PoE device.
APS08atH has the protection mechanism when power consumption is overloaded.If all the PDs power consumption is over 125W, the ports will stop receiving power based on *priority of the system. The lowest-priority port will be cut by thesystem.

* Priority: Port 1 is higher than port 2 (port 1> port 2> port
3> port 4> port 5> port 6> port 7> port 8).

EAN code : 4718050301102